7
Refer all other problems to your Stryker Instruments representative or call Stryker Instruments Customer Service at 1-800-253-3210.
Outside the US, contact your nearest Stryker subsidiary.
To ensure the longevity, performance, and safety of this equipment, package in original package materials when storing or
transporting.
Troubleshooting
WARNING: Disconnect from electrical supply before servicing.
Problem
Vacuum fails to start
Low Suction
Unit starts but stops without being turned off.
Action
Ensure unit is plugged in and the three-way switch is in the correct position.
Replace filter cartridge.
Check hose for blockage.
Clean filter cartridge.
The CastVac is provided with a thermal protective auto-reset switch.
Make sure filter cartridge is clean.
Ensure adequate ventilation is provided for exhaust.
To Next Page
Loading...