An LFO synced filter with three filter types, eight LFO waveshapes and
variable resonance. Envelope filtering and traditional Wah effects (with
an Expression pedal) are available.
PARAMETERS:
Low Pass
Wah
High Pass
MODE: Selects the current filter type. The low pass filter will
cut high frequencies, the high passfilter will cut low
frequencies, and wah is a classic wah wah bandpass
type filter.
FREQUENCY MID: Adjusts the frequency midpoint of the filter sweep.
L | H
WAVESHAPE: Sets waveform shape that the LFO will utilize. Both +
and - envelope modes trigger the filter based on the
input level but in opposite directions.
Triangle
Square
Ramp
Saw
Random
Envelope +
Envelope -
Sine
RESONANCE: Sets the amount of feedback in the filter. High
resonance causes ringing at the cutoff frequency and
subsequently a boost around the cutoff.
OFF
|||||||||
DRY LEVEL: Sets the amount of unfiltered signal at the output.
OFF
|||||||||
Continued on Next Page
To Next Page
Loading...