The Vinage Trem features three classic tremolo sounds from the ‘60s.
The distinctly different tremolo circuits in vintage combo amps of the
era resulted in three unique tremolos, each with their own signature
sound.
PARAMETERS:
MODE: Selects the current tremolo type. The tube tremolo
accomplished its tremolo sound by varying the bias on
the output tube circuit. The harmonic trem used band
filtering to achieve tremolo with a unique “phasey”
sound. The photoresistor tremolo cut the amplifier
in and out with a bulb/photoresistor combination for
the most choppy and square sounding tremolo of the
three.
Tube
Harmonic
Photoresistor
PAN: Determines the offset between the Left and Right
channel LFO signals. Listen to the effect it has on the
stereo image as you adjust the parameter. NOTE: Only
applies when using the unit in Stereo Configuration.
TIPS & TRICKS: For thick atmospheric trems, choose the HARM
mode at slower speeds. For moody sultry trems, try the TUBE mode.
For spy and surf sounds, check out the PHOTO mode at higher
speeds.
Off
Half
Full
To Next Page
Loading...