STS/Mutoh XPD 724 Printer Guidelineswww.stsinks.com
• Quarterly Maintenance
1. Lubricate the carriage guide rails and the bearings on the carriage.
2. Lightly clean the encoder strip with DI water only using a lint-free cloth once every
two or three weeks, and more often after heavy production.
3. Using a dry toothbrush gently clean the feed rollers to remove any build up present.
4. To maintain the ink delivery system, every three to four months ush the printer using
Long Store option in your MSM remote panel.
5. When not printing for long periods (more than 14 days); Flush all ink lines with STS
Cleaning Solution.
6. Every three months locate Long Store on your MSM dashboard to ensure clean internal
tubing. This will remove any sediment that may have accumulated over time.
Please do not open the printer external covers for any reason unless instructed to
do so by STS Technical Support as this will void your warranty!
The STS Inks Logo and the Wave Design are
Registered Trademarks of STS Rell Technology, LLC
STS REFILL TECHNOLOGY, STS INKS
8300 Congress Ave.
Boca Raton, FL 33487, USA
email: sales@stsinks.com
Phone: +1.561.999.8818
www.stsinks.com
Headquarters
STS Rell Technology Colombia
Calle 38 SUR #33-13
Envigado, 055420
email: norman@stsinks.com
Phone: +57-320-673-4976
www.stsinkscolombia.com
South America Oce
STS Inks Europe Ltd
Ana Ahmatova 9, 1729
Soa, Bulgaria
email: assen.velev@stsinks.com
Phone: +359 290 39999
www.stsinks.eu
Europe Oce
v.1.0
To Previous Page
Loading...