STT Condigi Careline Anna User Manual

Programming and installation manual Careline Anna / Careline GSM
Doc. no. 32-022-03-01 EN v6
Careline Anna /
Careline GSM
Programming and installation manual

STT Condigi Careline Anna Specifications

General

Brand	STT Condigi
Model	Careline Anna
Category	Emergency Phone
Language	English

Summary

Introduction to Careline Anna/GSM

1.1 General Description of Careline Anna/GSM

Provides an overview of the Careline Anna/GSM device and its communication capabilities.

1.2 Tx4 Alarm Transmitter Overview

Details the features and functionality of the Tx4 alarm transmitter accessory.

1.3 New Functions of Careline Anna/GSM

Installation Procedures

2.1 Initial Programming Steps

Outlines the initial programming step required before installing the carephone.

2.2 Power and Telephone Connections

Instructions for connecting the carephone to power and telephone line.

2.3 Mobile Network Connection

Guide for inserting and connecting a SIM card for GSM functionality.

Programming Structure and Setup

3.1 Alarm Receiver Telephone Numbers

Details the structure and information needed for programming alarm receiver phone numbers.

3.2 Alarm Receiver Addresses for GPRS

Explains the structure for programming GPRS alarm receiver addresses.

3.3 Alarm Type Configuration

3.4 Sequence Programming

Hand Terminal Programming Guide

4.1 Introduction to the Hand Terminal

Introduces the HT-III Hand terminal used for programming the carephone.

4.2 Creating and Saving Programming

Step-by-step guide to program and save settings using the hand terminal.

Carephone Programming with Hand Terminal

5.1 Connecting the Hand Terminal

Details the procedure for connecting the hand terminal to the carephone.

5.2 Basic Carephone Programming

Covers essential programming steps like alarm codes and phone numbers.

5.3 Programming Alarm Transmitters

Programming via Carephone Buttons

5.2.1 Programming Mode Functions

5.2.2 Button Programming of Transmitters

Battery Replacement Guide

6.1 Careline Anna/GSM Battery Replacement

Step-by-step guide for replacing the battery in the Careline Anna/GSM.

6.2 Tx4 Transmitter Battery Replacement

Instructions for replacing the battery in the Tx4 alarm transmitter.

Hand Terminal Menu Navigation

Main Menu Operations

Programming Menu Access

Accesses detailed programming parameters for the carephone.

Program Menu: Numbers, Addresses, Transmitters

Telephone Numbers & Addresses Configuration

Transmitter & Alarm Type Setup

Program Menu: Codes, Protocol, Sequences

Alarm Codes and Protocol Selection

Sequence Management and Types

Program Menu: Sequence Logic, Attempts, Connection

Call Attempts and Connection Type

Program Menu: Dialling, Incoming Calls, Timers

Program Menu: Link Test, Away Function, Power Timings

Program Menu: Staff Functions, Input/Output

Program Menu: External Controls, System Warnings

System Warning Setup

Program Menu: LED Indicators, GSM, Advanced Settings

LED Indicators and GSM Settings

Configuring LED indicators and GSM module/SIM card settings.