Need help?Do you have a question about the Stuart SCT1 and is the answer not in the manual?
Expresses gratitude for purchasing the product and emphasizes reading instructions for safety and performance.
Details the SCT1's capabilities as a temperature controller and digital thermometer, and its compatibility with Stuart hotplates.
Provides crucial safety warnings regarding improper use, hazardous environments, and operating conditions.
Guides users on setting up the SCT1 with a hotplate, connecting probes, and initial power-on procedures.
Explains how to position the SCT1 temperature controller, including mounting on retort rods and avoiding fumes.
Instructs on the correct immersion depth for the sensing probe and safe storage when not in use.
Describes the two modes of operation: control mode and monitor mode.
Details how to activate and use the SCT1 in control mode with specific hotplate models.
Explains the process of setting the desired temperature using the controller's buttons.
Provides instructions for operating the SCT1 in monitor mode for specific hotplate models.
Explains how to switch back from monitor mode to control mode.
Lists common error codes displayed by the SCT1 and their corresponding fault conditions and remedies.
Details basic cleaning procedures and safety precautions for maintenance.
Recommends using qualified personnel for repairs and only approved spare parts.
Lists physical properties and operating ranges for the probe.
Details temperature range, accuracy, resolution, and IP rating.
General| Display Resolution | 0.1°C |
|---|---|
| Control Algorithm | PID |
| Input Type | PT100 temperature sensor |
| Control Output | Relay |
| Display | LCD |
To Next Page