English
This equipment is designed to operate under the
following conditions:-
❖ For indoor use only
❖ Use in a well ventilated area
❖ Ambient temperature range
+5°C to +40°C
❖ Altitude to 2000m
❖ Relative humidity not exceeding 80%
❖ Mains supply fluctuation not exceeding 10%
❖ Overvoltage category II IEC60364-4-443
❖ Pollution degree 2 IEC664
If the equipment is not used in the manner
described in this manual the protection provided
by the equipment may be impaired.
Thank you for purchasing this Bibby
Scientific product. To get the best
performance from the equipment, and for
your own safety, please read these
instructions carefully before use.
Figure 1
IEC connector
Temperature
display
Control panel
Eye viewer
Sample tube
holder
Extendible feet
Instruction facia
Mains
on/off
To Next Page
Loading...
