This real-time function will also control the association between the Stick2 and the Sound or FX
controls (modulation or effect speed etc) in a logic and automatic way. When a particular FX is
selected on a section, the Stick 2 will control a particular parameter, like the Slow/Fast speed of the
Rotary or the Speed and Feedback of the Phaser.
The control will also be automatically set according to the focus position: if you have a Lower part
without FX and the focus on Lower, the Stick 2 will control the Modulation; if the focus is on
Upper and you have an Organ sound with Rotary, the Stick 2 will control the Rotary Slow/Fast
If the FX Autoset function is set to off (see the GLOBAL Edit section) the function of the Stick 2
will be under Part EDIT, with not automatic assignments, and you can store all settings in each
With the FX Autoset off, the automatic association between each sound and the last selected FX
will be disabled and the FX selection will be only manual or controlled by the FX setting stored in
This command is also received via MIDI and it is automatically deactivated the next time the
instrument is turned on; in LOCAL OFF the keyboard does not send the notes played on the
keyboard directly to the internal Sounds, but only via USB-MIDI to avoid unwanted repetitions
when using external Software Programs which receive the notes from the keyboard and send them
MULTI Ch: the instrument continues to work in its standard mode, sending notes and controls via
USB on the respective MIDI Channels 1-2 of the enabled sections and on the COMMON channel 16
only the general controls.
SINGLE Ch: the control panel controls and the notes played on the keyboard are transmitted via
USB on a single channel COMMON = 16
The merge function allows to merge-mix the MIDI IN data to the local MIDI data (notes, controls
etc) and send the result to the USB and/or MIDI Out; the selectable options are:
OFF = Merge function disabled
User manual - Numa Compact X SE https://www.studiologic-music.com/support/articles/ncxse_manual/?l...
19 di 32 01/03/2024, 13:41
To Next Page
Loading...
