This parameter controls the attack transient harmonics of the most Electric Pianos, with the
typical bell type sound or mechanical noise associated with the original vintage instrument.
PORTAMENTO TIME (SOLO X SE)
This parameter allows to set any value of Portamento between 0 and the maximum available time.
This parameter adjusts the timbre of every sound from mellower to brighter and store the related
Numa Compact SE has a complete MIDI Implementation, that includes 2 separate software MIDI
Ports, that you can see connecting the instrument with the USB Cable to your computer, named
KEYBOARD and CONTROLLER ports.
The KEYBOARD port is programmed to send and receive all MIDI controls related to the internal
SOUNDS, EFFECTS and PROGRAMS, allowing to control all functions of the instrument, sending
and receiving what you physically do on it, from the notes you play on the keyboard, to the
SOUNDS you select on the 2 local sections (Upper and Lower) and for the other 2 additional
sections (Part3 and Part4) that can be played via MIDI. Via MIDI you can also set the Part 3 and
Part 3 SOUNDS and Reverb levels (they cannot be sent to the internal Effects) creating a total of 4
As example you can play a Drums & Bass groove on MIDI CH3 and 4 and record a live part on
UPPER and/or LOWER, creating a 4 part arrangement of any kind.
The four KEYBOARD Parts have a separate MIDI Channel each one, corresponding to the
following MIDI structure:
Upper = MIDI Ch1 (send and receive)
Lower = MIDI Ch2 (send and receive)
Part 3: MIDI Ch3 (receive only)
Part 4: MIDI Ch4 (receive only)
All real time Panel controls (Organ Drawbars and Synth Sliders, SOUNDS, FX selection and
related Amounts and settings etc) are sent and received, as listed in the MIDI IMPLEMENTATION
CHART. The last four potenziometers are only for local settings (VOLUME, MASTERING, BASS &
User manual - Numa Compact X SE https://www.studiologic-music.com/support/articles/ncxse_manual/?l...
26 di 32 01/03/2024, 13:41
To Next Page
Loading...
