StumpJumper EVO ALLOY

Need help?

Do you have a question about the StumpJumper EVO ALLOY and is the answer not in the manual?

Summary

2. GENERAL NOTES ABOUT ASSEMBLY

2.2. SEATPOST

Covers seatpost minimum and maximum insertion requirements.

2.6. STEM

Discusses Alloy Trail Stem installation and warnings.

3. GENERAL NOTES ABOUT MAINTENANCE

4. SPECIFICATIONS

4.5. BOLT SIZE; TOOLS; TORQUE SPECIFICATIONS

Details importance of correct torque and fastener use.

4.6. GENERAL TORQUE SPECIFICATIONS

Provides a table of torque specifications for various components.

5. REAR TRIANGLE PIVOT ASSEMBLY

5.1. BEARING ASSEMBLY

Details installing main pivot bearings and spacers.

5.2. PIVOT ASSEMBLY

Step-by-step guide for assembling various pivot points.

5.3. SUSPENSION TORQUE SPECIFICATIONS

Summarizes torque specifications for suspension pivots.

6. INTERNAL ROUTING

6.2. REAR DERAILLEUR AND REAR BRAKE

Details routing of brake and shift housings in chainstay.

6.5-6.9 INTERNAL ROUTING COMPLETION

7. FLIP CHIPS & HEADSET CUPS

7.1. ADJUSTING THE HORST PIVOT FLIP CHIP

7.2. ADJUSTING THE HEAD TUBE ANGLE

7.3 & 7.4 HEADSET CUP INSTALLATION

7.5 & 7.6 HEADSET ASSEMBLY AND ALIGNMENT

7.7 FORK AND STEM INSTALLATION

8. AIR SHOCK SETUP

8.1. SETTING AIR PRESSURE

Guides setting shock sag and air pressure.

9. DERAILLEUR HANGER

INSTALLATION PROCEDURE