Need help?Do you have a question about the Sturtevant Richmont Torq-Tronics 2 and is the answer not in the manual?
General| Model | Torq-Tronics 2 |
|---|---|
| Manufacturer | Sturtevant Richmont |
| Category | Measuring Instruments |
| Type | Electronic Torque Tester |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Units of Measure | ft-lb, in-lb, Nm |
| Communication | RS-232 |
| Power Supply | 100-240 VAC, 50-60 Hz |
| Display | LCD |
| Operating Temperature | 60° to 100° F (15° to 38° C) |
Details safety precautions and recommendations for using the Torq-Tronics 2 safely.
Provides step-by-step instructions for preparing and performing torque tests with the unit.
Outlines recommended practices and procedures for accurate torque verification and testing.
Step-by-step guide for testing manual torque screwdrivers and click type torque wrenches.
Procedure for testing beam, dial, and cam-over torque wrenches with the unit.
Instructions for testing power tools, including selecting the appropriate mode and filter.
Guide for testing digital torque wrenches, noting requirements for tracking mode and loaders.
Recommended process for calibration check of the Torq-Tronics 2 tester, including required equipment.
Specifies the accuracy requirements and guard bands for testing and calibration.
Recommended process for performing calibration adjustments on the Torq-Tronics 2 tester.
To Next Page
