Stuv 21 - Page 6

4. INSTALLATION - FLOOR PREPARATION
STU
^
V 21 | MODEL SPECIFICATIONS
PAGE 6
The Stûv 21 can be installed straight
onto the surface with no prior
preparation required.
NON-COMBUSTIBLE FLOOR
The Stûv 21 must be installed on
a 18mm tick cement sheet plate
(minimum) and raised using the
appliance’s adjustable feet so that the
bottom edge of the firebox door is at
least 300mm from the floor.
BRICK WORK
50mm AIR GAP
18mm CEMENT SHEET
TIMBER FLOOR
COMBUSTIBLE FLOOR
NON-COMBUSTIBLE SURFACE
300mm minimum
COMBUSTIBLE SURFACE