Style selections Morriston LWSBDS

To Next Page

ITEM #1599712

MODEL #LWSBDS

Serial Number

Purchase Date

Questions?

Call customer service at 1-877-888-8225,

8 a.m. - 8 p.m., EST, Monday - Sunday.

ATTACH YOUR RECEIPT HERE

PACKAGE CONTENTS

3-TIER OVER-THE-TOILET

SHELF TOWER

x 1

Top panel

1 2

STYLE SELECTIONS is a trademark or registered

x 1 x 1

Left upper side frame Right upper side frame

B C

x 1

Left lower side frame

x 1 x 1

Right lower side frame Front upper stretcher

E F

x 1

Back panel

x 1 x 1

Adjustable shelf Fixed shelf

H I

x 1

Bottom shelf

Back bottom stretcher

Front bottom stretcher

Barn door

Back upper stretcher

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the

product.

1. Do not allow children to climb or play in or around this product.

2. Use this unit for its intended purpose only. Do not use shelves as step ladder.

3. To avoid damage, assemble the product on a sturdy, level and protective surface.

4. Two or more persons must work together to install the unit onto the wall.

5. Make sure all bolts/screws are tightly fastened before the unit is used.

6. Check bolts/screws periodically and tighten them if necessary.

MAXIMUM LOAD: 20 lb.

FOR EACH SHELF

(EVENLY DISTRIBUTED)

PREPARATION

WARNING

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to

assemble the product.

Estimated Assembly Time: 50 minutes

Tools Required for Assembly (not included): Phillips screwdriver, rubber mallet, stud nder, pencil,

tape measure, power drill and drill bits.

THIS UNIT IS INTENDED FOR

USE ONLY WITH THE MAXIMUM

WEIGHTS INDICATED. USE WITH

PRODUCTS HEAVIER THAN THE

MAXIMUM WEIGHTS INDICATED

MAY RESULT IN INSTABILITY

CAUSING POSSIBLE INJURY.

DISTRIBUTE WEIGHT EVENLY.

WARNING

Young children can be killed when furniture tips over. Place heavy items on lower shelves. You

must use anchors to secure furniture to wall. Make sure that all objects are removed before

moving the assembled unit. The unit must be team lifted, not dragged or pushed. Failure to do

so could cause instability, product collapse, and/or serious injury.

HARDWARE CONTENTS

x 2x 4

x 1

x 1x 2

x 2

KKJJ

NNMM

M3.5 x 12 mm

Flat head screw

Tipping restraint

hardware

Touch-up penM5 x 65 mm Screw

Barn door roller

M4 x 15 mm

Bolt

HARDWARE CONTENTS

Note: Hardware shown not actual size.

x 30

x 1

x 24 x 1 x 4

GG HH II

Cam lock

L-bracket

M3.5 x 15 mm

Screw

Door knob

with bolt

Shelf pin

x 30

x 6

x 26

x 4

Cam bolt

M3.5 x 12 mm Pan

head screw

Wood dowel

M4 x 38 mm

Screw

Français p. 11

Español p. 21

x 2

Back crosser

AR19041

Main Page

Need help?

Do you have a question about the Style selections Morriston LWSBDS and is the answer not in the manual?

Summary

Hardware Contents

All Hardware Components

Lists all screws, bolts, dowels, and accessories included for assembly.

Package Contents

All Product Parts

Details all panels, shelves, and structural components included in the package.

Safety Information and Warnings

General Safety Precautions

Important guidelines for safe assembly, use, and handling to prevent injury or damage.

Weight Limit Warning

Specifies the maximum load capacity per shelf to ensure stability and prevent accidents.

Anti-Tip Safety

Crucial instructions on securing the unit to the wall to prevent tipping and protect against serious injury.

Assembly Preparation

Pre-Assembly Checks

Instructions to verify all parts are present and undamaged before starting assembly.

Assembly Instructions

Step 1: Assemble Left Lower Frame

Attaching stretchers to the left lower side frame using dowels, bolts, and cam locks.

Step 2: Assemble Right Lower Frame

Repeating the assembly process for the right lower side frame.

Step 3: Attach L-bracket to Fixed Shelf

Securing an L-bracket to the fixed shelf using pan head screws.

Step 4: Assemble Left Upper Frame

Attaching the fixed shelf and front upper stretcher to the left upper side frame.

Step 5: Assemble Right Upper Frame

Repeating the assembly process for the right upper side frame.

Step 6: Attach Top Panel

Connecting the top panel to the upper frame assembly using dowels, bolts, and cam locks.

Continued Assembly Steps

Step 7: Attach Bottom Shelf

Connecting the bottom shelf to the upper side frames using dowels and screws.

Step 8: Secure Bottom Frame Assembly

Attaching the bottom frame assembly to the bottom shelf with cam bolts and locks.

Step 9: Attach Back Panel

Securing the unfolded back panel to the tower back using screws.

Step 10: Install Adjustable Shelf

Inserting shelf pins and securing the adjustable shelf with flat head screws.

Step 11: Install Barn Door Hardware

Attaching the door knob and barn door rollers using screws.

Operating and Final Assembly

Step 12: Secure Unit to Wall

Leveling the unit and attaching it to the wall using screws and optional anchors.

Step 13: Install Tipping Restraint

Securing the unit to the wall using the provided tipping restraint hardware for safety.

Step 14: Hang Barn Door

Mounting the barn door onto the unit's hanging bar and securing it with bolts.

Care and Maintenance

General Care Guidelines

Recommendations for cleaning, maintaining the finish, and protecting the furniture.

Environmental Considerations

Advice on keeping the furniture in a climate-controlled environment to prevent wood damage.

Touch-Up Pen Usage

Information on using the touch-up pen for minor nicks or scratches.

Product Information

Limited Lifetime Warranty

Details on warranty coverage, limitations, and consumer rights for the product.

Replacement Parts List

A comprehensive list of all available parts, their descriptions, and part numbers.