To Next PageTo Next Page
Need help?Do you have a question about the Style selections NRS2230MV and is the answer not in the manual?
Notes on drill bit sizes and screw types for surface mount installation, including stud and drywall options.
Notes on drill bit sizes and screw types for recess mount installation.
Attach side panels to the cabinet body using adhesive strips.
Position the cabinet on the wall, ensure it's level, and mark mounting holes.
Adjust hinge screws for horizontal and lateral positioning before mounting.
Secure the hinges to the cabinet body using mounting bracket screws.
Fasten the cabinet door to the installed hinges using hinge screws.
Insert shelf clips, place shelves, and apply bumpers to the cabinet.
Position the cabinet on the wall, ensure it's level, and trace its outline.
Cut a hole in the wall following the traced outline for recess mounting.
Install the cabinet into the prepared wall opening using appropriate mounting screws.
Adjust hinge screws for horizontal and lateral positioning within the wall.
Secure the hinges to the cabinet body using mounting bracket screws.
Fasten the cabinet door to the installed hinges using hinge screws.
Insert shelf clips, place shelves, and apply bumpers to the cabinet.
Instructions for adjusting the cabinet door from side to side.
Instructions for adjusting the cabinet door vertically.
Instructions for adjusting the cabinet door's depth.
General| Brand | Style selections |
|---|---|
| Model | NRS2230MV |
| Category | Indoor Furnishing |
| Language | English |
