Ø13
WARRANTY
FAUCET INSTALLATION
Ensure there is a Ø13mm
hole diameter in the countertop.
1
BEFORE YOU BEGIN YOUR INSTALLATION
Products and specifications shown are subject to change without notice. Please contact our technical support at care@stylishkb.com for any further queries, replacement parts requests, etc. ©2021 Stylish
®
all right reserved.
Stylish International Inc. stylish.international.incFollow us on Instagram! Check out and let us know your comments
CARE AND CLEANING
TOLL
FREE
+1-855-789-5352
TOLL
FREE
www.stylishkb.com
care@stylishkb.com
For additional technical assistance or for
any questions or concerns about your
faucet's warranty, please contact us.
www.stylishkb.com/warranty
LODI
K-142
DRINKING WATER TAP
Clean the faucet frequently using mild soap or an on-abrasive
cleaner and then quickly rinse with water and dry with soft cloth
only.
Using abrasive cleaners, solvents, acid cleaners or any scrubbing
detergent, polisher or scraper will damage the finish and void the
warranty.
Connect the appropiate
connector size. We include a
1/4” and a 3/8” connector.
Attached supply hose (not
provide with this water tap)
4
Shut off
water supply
Flush hot and cold
water supply lines
Required tools Installation by License
Professional Plumber
Flush the water pipe
before installation
Drawings are for
reference only
Do not disassemble
the body
Remove the mounting nut
from faucet.
Tighten gently hose connection
with a wrench.
2
5
Insert faucet into countertop
hole and secure mounting nut.
3
6
Check for any water leak or
kinked hose and correct
accordingly.
To Next Page
Loading...