Stylish TURIN K-143 User Manual

C
B
A
E
Ø35mm
WARRANTY
FAUCET INSTALLATION
Ensure there is a Ø35mm
through-hole on the kitchen
counter. Remove the mounting
nut (A) and washer (B) from the
threaded shroud (C).
1
BEFORE YOU BEGIN YOUR INSTALLATION
Products and specifications shown are subject to change without notice. Please contact our technical support at care@stylishkb.com for any further queries, replacement parts requests, etc. ©2021 Stylish
®
all right reserved.
Stylish International Inc. stylish.international.incFollow us on Instagram! Check out and let us know your comments
CARE AND CLEANING
TOLL
FREE
+1-855-789-5352
TOLL
FREE
www.stylishkb.com
care@stylishkb.com
For additional technical assistance or for
any questions or concerns about your
kitchen faucet's warranty, please contact
us.
www.stylishkb.com/warranty
TURIN
K-143
KITCHEN FAUCET
Clean the faucet frequently using mild soap or an on-abrasive
cleaner and then quickly rinse with water and dry with soft cloth
only.
Using abrasive cleaners, solvents, acid cleaners or any scrubbing
detergent, polisher or scraper will damage the finish and void the
warranty.
2
Position faucet on the installation
surface. Fit flexible hoses through
hole on countertop or sink.
Slide washer and thread the
mounting nut onto threaded
shroud. Turn faucet to desired
handle position. Securely tighten
clamp screws (E).
3 4
Secure weight on lowest vertical
point on pull-out hose side.
(not on quick connect side).
5 6
Connect hot and cold water
lines to the inlet pipe and tighten
with a wrench until snug.
Do not over tight.
7 8
Connect braided supply hoses
to faucet female outlets, secure
firmly by hand until hose is snug
to pipe.
Connect pullout hose to quick
connect and insert weight
(loose-install).
Before connecting supply hose,
flush supply valves to clear any
debris. Place a bucket under-
neath valves and run water for 5
to 10 seconds. Turn water off.
Unscrew spray head by hand.
Hold the tip of the spray hose
down and turn on the faucet
and let the water run 60 seconds
to flush any debris,
the re-connect spray head.
Ensure gasket is present.
Shut off
water supply
Flush hot and cold
water supply lines
Required tools Installation by License
Professional Plumber
Flush the water pipe
before installation
Drawings are for
reference only
Do not disassemble
the body

Stylish TURIN K-143 Specifications

General

Brand	Stylish
Model	TURIN K-143
Category	Plumbing Product
Language	English

Summary

Before You Begin Your Installation

Water Supply Preparation

Important steps to shut off water supply and flush water lines before commencing installation.

Tools and Professional Advice

Gathering necessary tools and considering installation by a licensed professional plumber.

Installation Warnings

Key warnings including flushing pipes, reference drawings, and not disassembling the faucet body.

Faucet Installation Steps

Step 1: Prepare Mounting Hole

Ensure a Ø35mm hole and remove mounting nut and washer from the faucet's threaded shroud.

Step 2: Connect Supply Hoses

Connect braided supply hoses to the faucet's female outlets, securing by hand until snug.

Step 3: Position and Secure Faucet

Place faucet, fit hoses through hole, attach washer and mounting nut, then tighten clamp screws.

Step 4: Connect Pullout Hose and Weight

Connect the pullout hose to the quick connect fitting and loosely install the weight.

Step 5: Secure Hose Weight

Ensure the weight is secured at the lowest vertical point on the pull-out hose side.

Step 6: Flush Supply Valves

Flush supply valves to clear debris before connecting hoses; run water for 5-10 seconds.

Step 7: Connect Water Lines

Connect hot and cold water lines to the inlet pipe and tighten with a wrench until snug.

Step 8: Flush Debris from Spray Head

Unscrew spray head, run faucet for 60 seconds to flush debris, then reconnect spray head.

Care and Cleaning

Cleaning Instructions

Clean with mild soap or non-abrasive cleaner, rinse quickly with water, and dry with a soft cloth.

Prohibited Cleaning Agents

Avoid abrasive cleaners, solvents, acid cleaners, or scrubbing agents to prevent damage and voiding warranty.

Warranty and Support

Contact for Assistance

Contact for technical assistance, questions, or concerns about the kitchen faucet's warranty.

Online Resources

Visit stylishkb.com/warranty for warranty information and stylishkb.com for general information.

Support Contact Information

Contact details including email care@stylishkb.com and phone +1-855-789-5352.