Do you have a question about the Su-Kam Brainy Eco Solar Home UPS 1100 and is the answer not in the manual?
Features a 30 Amp controller to charge battery and run load simultaneously, preventing overcharging.
Achieves 98% battery charging efficiency, extending battery life by at least 6 months.
Table for selecting switch settings based on battery capacity and solar panel wattage.
Configuration for battery type selection and enabling/disabling grid charging.
Explains settings for prioritizing Grid vs. Solar power based on voltage levels.
Outlines the sequence: Attach battery, connect panel, connect mains, connect output.
Visual representation of how to connect the battery, panel, mains, and loads.
Read instructions, avoid rain/liquids, do not disassemble, disconnect wiring before cleaning.
Highlights dangers from battery gases, need for ventilation, and safe handling.
Avoid heavy loads on battery, avoid stabilizers, recommend point-to-point wiring.
Addresses no output when mains are present or no output after startup.
Covers causes like wiring, overload, short circuit, or low battery.
Deals with low battery display, solar not operating, or grid MCB trips.
Covers PV voltage, charging current limits, and protection mechanisms.