EN-11
Thank you for choosing Suaoki.
This product is a simple wireless bike computer that tracks speed, distance and
time. It is compact, lightweight and comes with everything you need. This device
is ideal for cyclists who like to know all those data, monitor their progress or
optimize their training.
Please read this manual thoroughly before use and keep it for future reference.
Install Battery
[Refer to Diagram 5]
Step 1
Insert a coin to the dent of the battery cover and then rotate it counter-clockwise
to open battery cover.
Step 2
Put in the button cell battery with the positive side facing upward. Put the battery
cover back and rotate it clockwise to close the battery cover. Setting menu
opens automatically when the battery is inserted.
Set the Computer Unit
[Refer to Diagram 1]
Press SET button to select. Press MODE button to confirm the choice and
move on to the next value. You can configure following values: display
language, units (KMH/MILE), bike A/B, wheel circumference, total distance, total
ride time, clock format 12H/24H, clock time and gender, age, height, weight.
Note
*1 Age & Height & Weight
The unit of the Height is Centimeter, and the Weight unit is Kilogram. The
minimum default data is “AGE: 30 years old, Height: 170cm, Weight: 70kg”.
Press SET button to add. Note that this data cannot be subtracted.
1 cm =0.03 feet, 1kg = 2.2 lb
*2 Dual Bike Memory
This computer unit could record two sets of data, one set for Bicycle A, another
set for Bicycle B.
*3 Wheel Circumference
You can find the wheel circumference (L) of your bike in the Appendix. Usually,
ETRTO or tire size is indicated on the side of the tire. You could also measure tire
circumference by doing a wheel roll out:
[Refer to Diagram 7]
To Next Page
Loading...