Suaoki 9500 - Data Management and Clearing; Resetting Operation Data; Backlight Operation Details

EN-14
TOT-DIST
Total ride distance from last reset. You can reset this value by taking the battery
out of its compartment. Data would be deleted once you replace this device’s
battery and then could enter the total ride distance manually.
TOT-TIME
Total trip time from last reset. You can reset this value by taking the battery out of
its compartment. Data would be deleted once you replace this device’s battery
and then could enter the total trip time manually.
SCAN
Automatic rotation of selected values: Ride Time, Distance, Average Speed,
Max Speed and Total Distance
MEMORY
The memory saves data recorded in last 7 days. To list between the days
press SET. Displayed data as follows: date, AVS, MXS, RTM and
DST(rotation automatically)
How to Clear Operation Data
You can reset following values all together: RIDETIME, DST, AV-S and MX-S,
CO
2
, CALORIE.
Single Value Reset
Long press SET button. On the display screen, ‘RESET’ will flash for twice and
then the single value reset is done.
All Value Reset
Long press the SET button and ‘RESET’ will start to display on screen. Release
and then long press the SET button again. On the display screen, ‘ALL RESET’
will flash for twice and then the all value reset is done.
Note: TOT-DIST, MEMORY and CLOCK cannot be reset.
Backlight
In any MODE and hold [SET]+[MODE], shows the LIGHT ON or LIGHT OFF,
when in LIGHT ON mode, press any key and the backlight turn on 3 seconds.