Need help?Do you have a question about the Suaoki ICS7+ and is the answer not in the manual?
General| Charging Current | 7A |
|---|---|
| Operating Temperature | -20°C to 50°C |
| Efficiency | ≥85% |
| Output Current | 7A |
| Battery Type | Lead-acid, AGM, Gel |
| Protection Features | Short-circuit, Reverse polarity |
| Cooling System | Built-in fan |
| Charging Time | Varies depending on battery capacity |
| Input Voltage | 100-240V AC 50/60Hz, 12-24V DC |
Details the advanced technology and charging capabilities of the ICS7+.
Explains the multiple charging modes for different battery types.
Charger inactive, conserving energy.
Fast charging for 12V Wet Cell, Gel Cell, Maintenance-Free batteries.
Slow charging for 12V Wet Cell, Gel Cell, Maintenance-Free batteries.
Fast charging for 12V AGM & EFB batteries in cold temps.
Slow charging for 12V AGM & EFB batteries in cold temps.
Fast charging for 12V LiFePO4 lithium batteries.
Mode for repairing old, idle, or sulfated batteries.
Plug in charger; LCD displays 'Pon'.
Choose battery type icon on LCD.
Select 'SLOW' or 'FAST' charging rate.
Attach RED (+) and BLACK (-) clamps to battery.
Charger proceeds through 9 charging steps.
Covers winter mode, battery detection, polarity safety.
Explains symbols for voltage, current, status, and modes.
Voltage/current steps for 12V/7A SLA charging.
Voltage/current steps for 12V/3.5A SLA charging.
Voltage/current steps for 12V/7A LiON charging.
Voltage/current steps for 12V/3.5A LiON charging.
Voltage/current steps for 12V/7A AGM charging.
Voltage/current steps for 12V/3.5A AGM charging.
Checks battery condition and rejuvenates fatigued batteries.
Aids recovery for batteries with very low initial charge.
Removes sulphate from plates for sulphated batteries.
Re-activates battery elements for better charging.
Constant current charge until 80% full.
Constant voltage charge, current reduces as battery fills.
Charge stops at 100% battery capacity.
Verifies battery voltage retention after charging.
Maintains optimal battery voltage with constant charge.
Shows estimated charging times for battery sizes and currents.
Covers polarity, snow mode, and general warnings.
Guidelines for charging 12V LiFePO4 batteries.
Details on using the conditioning mode for lead-acid batteries.
Electrical ratings, compatibility, temperature, protection.
Lists all items included with the charger.
Warranty duration and contact information for support.
To Next Page
