Smart Battery Clamp
Operation Guidance
How to charge the product?
EN-2
EC5 Plug
Indicator Light
Force Start Button
Method 1:
Connect one end of the charger to
the wall outlet. Connect the other
end of the charger to the 15V input
port of the product. The charging
would start automatically. Once
connected properly, the product
will be charged automatically.
Method 3:
1. Plug the car charger into the socket of cigarette lighter on your 12V vehicle.
2. Insert the other end into the 15V input port of the jump starter.
Method 2:
Connect one end of the TYPE-C
cable to the TYPE-C port of the
power supply. Connect the other
end of the cable to the 5V input
port of the product.
To Next Page
Loading...
