What to do if my Suavinex ST060 steriliser does not work?
If your Suavinex steriliser isn't working, there are a few things you can check: - Ensure the power supply cable is properly plugged into the mains. - Verify that the power button is in the ON position. - Make sure there is enough water in the tank. - If you've just used it, switch it off and allow the heating element to cool down before starting another cycle.
Why does my Suavinex Baby Accessories steriliser make a lot of noise?
If your Suavinex steriliser is making excessive noise, perform the standard cleaning procedures. After cleaning, leave the water tank to ventilate in a cool place for about 24 hours with the lid open.
How to get rid of strange smell from Suavinex ST060 Baby Accessories steriliser?
If your Suavinex steriliser emits an odd smell, start by performing the usual cleaning steps. Following cleaning, let the water tank air out in a cool area for 24 hours with the lid off.
Step-by-step guide for using the steriliser electrically.
Step-by-step guide for using the steriliser in a microwave.
Instructions for cleaning key components of the steriliser.
General| Brand | Suavinex |
|---|---|
| Model | ST060 |
| Category | Baby Accessories |
| Language | English |
To Next Page
