111111111111
2
CHECKING THE RESULTS
That's it. You've completed the installation of a Sub-Zero
200 Series refrigerator/freezer. But you're not finished yet.
Go over our checklist of installation steps.
• Has the packing material and tape been removed?
• Turn the unit on first, is the unit operating properly? If
not, is it plugged in? Is the control turned on?
• Is the water supply line (if applicable) connected to the
compression fitting and not leaking?
• Is the unit leveled properly on a solid floor?
• Has the door panel been installed properly?
• Is the kickplate installed?
• Are the kickplate screws back in position?
• Have the door hinge screws been tightened correctly?
• Are the doors adjusted for proper operation, sealing and
alignment?
• Does your customer understand the unit's operation?
• Is the ice maker arm in on position (if applicable)?
• Have you given your customer the warranty package?
SERVICE FOR YOUR SUB-ZERO
REFRIGERATION SYSTEM
If you need service, check the model and serial number on
the plate at the top frame of the unit inside the door.
Contact a Sub-Zero Factory Authorized Service Center, a
dealer, or Sub-Zero Freezer Company, Customer Service
Dept., P. O. Box 44988, Madison, WI 53744-4988, call 800-
222-7820, or e-mail us at customerservice@subzero.com.
THINK SAFETY!
If you are storing or disposing of your old refrigerator,
please do it safely.
Child entrapment accidents can be tragic.
200
SERIES
200 IG 3758400 1-04.qxd 1/2/2004 7:55 AM Page 11
To Next Page
Loading...
Need help?
General
