subzero.com/specs
|
79
WINE STORAGE
Custom Panel—WS-30 | BW-30
SIDE PANEL
The custom side panel must be a minimum of 24" (610) deep
and
1
/2" (13) thick. Routing will be necessary for the side
panel to t ush against the side of the unit. Refer to the
illustrations below.
When installing model WS-30 or BW-30 with a custom side
panel, an accessory kit is required. Stainless steel and white
enamel side panels are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com.
84"
(2134)
24" (610)
OPTIONAL
TOE KICK
CUT-OUT
4" (102)
1
7
/8"(48)
1" (25)
ROUT TO
1
/8" (3)
FRONT
OF SIDE
PANEL
2
5
/8"
(67)
MAIN
FRAME
SIDE PANEL
ROUTING
1" (25)
1
7
/8" (48)
1
/8" (3)
1
/2" (13)
Side panel dimensions.
Routing detail.
Standard Handles
Optional stainless steel tubular and pro handles are avail-
able through an authorized Sub-Zero dealer. For local dealer
information, visit the nd a showroom section of our
website, subzero.com.
Refer to the chart below for standard handle lengths for
wine storage models.
HANDLE LENGTH
TUBULAR PRO
424G, UW-24 Door 24
1
/4" (616) 22
1
/4" (572)
IW-18, IW-24, IW-30 Door 50
1
/8" (1273) 48
3
/8" (1229)
IW-30R Door 33
1
/4" (845) 31
1
/2" (800)
IW-30R Drawer 24
1
/4" (616) 22
1
/2" (572)
WS-30, BW-30 Door 63
7
/8" (1622) 45
3
/16" (1147)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
To Next Page
Loading...
Need help?
General
