15
Dimensions in parentheses are in
millimeters unless otherwise specified.
PARTIAL FRAMED DOOR PANELS
I
ce | Water Dispensing Framed (F) Models
Model 685 W H
Refrigerator Partial Framed Panel 15
5
/8" (397) 67
11
/1
6
" (1719)
Freezer Partial Framed Panel 15
5
/8" (397) 67
11
/16" (1719)
Model 695 W H
Refrigerator Partial Framed Panel 17
1
5
/1
6
" (456) 67
1
1
/1
6
" (1719)
F
reezer Partial Framed Panel
1
7
1
5
/1
6
"
(456) 67
1
1
/1
6
"
(1719)
T
he partial framed accessory kit (FRAMPAR) is required for this option.
Kit includes partial framed molding and classic stainless steel inset
h
andle panels for above and below glasswell on the refrigerator door.
P
ANEL GRILLE OPTION
F
ramed (F) Models
Models 611 and 611G W
Grille Panel Width 28
3
/1
6
" (716)
M
odels 650, 650G, 661 W
Grille Panel Width 34
3
/16" (868)
Models 642 and 685 W
Grille Panel Width 40
3
/16" (1021)
Models 632 and 695 W
Grille Panel Width 46
3
/16" (1173)
10" (254) Grille H
Grille Panel Height 8
15
/1
6
" (227)
11" (279) Grille
(standard) H
Grille Panel Height 9
1
5
/16" (252)
12" (305) Grille Height H
Grille Panel Height 10
15
/16" (278)
13" (330) Grille H
Grille Panel Height 11
15
/16" (303)
14" (356) Grille H
Grille Panel Height 12
15
/16" (329)
15"
(381) Grille
H
Grille P
anel Height
1
3
15
/16"
(354)
F
or panel grille insert size
, use width dimension listed
for y
our model and height dimension for grille option.
11" (279) grille is standard
.
FRAMED DOOR PANELS
S
ide-by-Side Framed (F) Models
Model 661 W H
Refrigerator Framed Panel 19
1
/8" (486) 67
11
/1
6
" (1719)
Freezer Framed Panel 14
5
/8" (371) 67
11
/16" (1719)
Raised Panel Handle Recess Location –
Refrigerator | Freezer Panel A) 38
5
/32" (969)
Model 642 W H
Refrigerator Framed Panel 24" (610) 67
11
/1
6
" (1719)
F
reezer Framed Panel
1
5
5
/8"
(397) 67
11
/16"
(1719)
R
aised Panel Handle Recess Location –
Refrigerator | Freezer Panel A) 38
5
/32" (969)
M
odel 685 W H
Refrigerator Framed Panel 24" (610) 67
11
/1
6
" (1719)
Freezer Framed Panel 15
5
/8" (397) 67
1
1
/16" (1719)
Raised Panel Handle Recess Location –
Refrigerator | Freezer Panel A) 38
5
/32" (969)
Glasswell Cut-out Dimensions 5
7
/8" (150) 12
7
/16" (315)
Glasswell Location (Refrigerator) E) 1
9
/16" (39) F) 28
9
/16" (726)
Model 632
WH
Refrigerator Framed Panel 27
11
/16" (703) 67
11
/16" (1719)
Freezer Framed Panel 17
1
5
/16" (456) 67
1
1
/16" (1719)
Raised Panel Handle Recess Location –
Refrigerator | Freezer Panel A) 38
5
/3
2
" (969)
Model 695 W H
Refrigerator Framed Panel 27
1
1
/16" (703) 67
1
1
/16" (1719)
Freezer Framed Panel 17
15
/1
6
" (456) 67
11
/1
6
" (1719)
Raised Panel Handle Recess Location –
Refrigerator | Freezer Panel A) 38
5
/32" (969)
Glasswell Cut-out Dimensions 5
7
/8" (150) 12
7
/16" (315)
Glasswell Location (Refrigerator) E) 1
9
/16" (39) F) 28
9
/16" (726)
IMPORTANT NOTE: Panel specifications are for Built-In framed (F)
models. Panel specifications for overlay models are on pages 18–19.
For Models 685 and 695, panel thickness in the glasswell area can
range from
1
/4" (6) to a maximum of 1
1
/8" (29). If the panel is thicker,
you must rout out a minimum
1
/4" (6) flat landing area to accommo-
date the bezel surrounding the glasswell.
Models 661, 642
and 632
Models 685 and 695
Models 685 and 695
P
artial F
ramed Option
FRAMED
P
ANELS
Panel specifications
are for Built-In
framed (F) models.
FRAMED PANEL SPECIFICATIONS
To Next Page
Loading...
