Wine Storage Use & Care 11
subzero.com
Wine Storage
WINE STORAGE SHELVES
All Sub-Zero wine storage models have roller-assembly
shelves with a full three-quarter extension for easy access
to all stored bottles. Models 424G and 424FSG have
roller-assembly shelves in all instances with the exception
of the bottom stationary shelf.
The wine storage shelves have a solid natural cherrywood
facing that can be replaced with other wood to match
your cabinetry. Details on how to replace the shelves’
wood facing can be found in the Sub-Zero design guide.
Check our website at subzero.com or call Sub-Zero
customer care at 800-222-7820.
IMPORTANT NOTE: If you choose to stain or seal the
shelves’ natural cherrywood facing, be aware that some of
these substances are hazardous and will damage stored
wine.
Your wine storage unit is intended to maximize the storage
of bottles in an ideal environment where the wine stays in
contact with the cork at an even temperature. Standard
750 ml bottles fit on all shelves of any wine storage unit.
Half-bottles and magnums can be arranged on the shelves
in the same manner as 750 ml bottles. Refer to the illustra-
tion for the proper arrangement of bottles on the shelves.
WINE STORAGE SHELF REMOVAL
To remove a wine storage shelf, pull the shelf out to its full
extension, gently and evenly lift up on both sides of the
front of the shelf and remove. Refer to the illustration
below. Reverse the procedure to reinstall the shelf.
Wine storage arrangement. Wine storage shelf removal.
Be sure to unload all bottles from the wine storage
shelf before removing it.
When storing magnums, you must remove the shelf
above to accommodate these larger bottles. Failure to
do so may cause the bottles to break.
To Next Page
Loading...
Need help?
General
