3
Instruments and controls
3-19
– CONTINUED –
J Turn signal indicator lights
These lights show the operation of the turn signal or lane change signal.
If the indicator lights do not blink or blink rapidly, the turn signal bulb
may be burned out. Replace the bulb as soon as possible. Refer to the
“Replacing bulbs” section in chapter 11.
J High beam indicator light
This light shows that the headlights are in the high beam mode.
This indicator light also comes on when the headlight flasher is operated.
Clock
HB2013BA
To set the time, turn the setting knob clockwise to advance and counter-
clockwise to retard the time.
To Next Page
Loading...
