11-48 Maintenance and service
the lens with a flat-head screwdriver.
2. Pull the bulb out of the socket. Install a
new bulb.
3. Reinstall the lens.
High mount stop light
0
1. Remove the mounting screw covers by
prying the edge with a flat-head screwdriv-
er.
2. Remove the mounting screws using a
Phillips screwdriver and then remove the
high mount stop light cover.
3. Pull the bulb from the socket. Install a
new bulb.
4. Reinstall the cover.
5. Tighten the mounting screws then rein-
stall the covers.
NOTE
Other bulbs may be difficult to replace.
Have your SUBARU dealer replace
these bulbs if necessary.
B00093
To Next Page
Loading...
