Black plate (35,1)
北米Model "A8130BE-B" EDITED: 2007/ 7/ 25
To adjust the seat height, pull up or push
down the rear end of the control switch.
! Reclining the seatback
WARNING
To prevent the passenger from slid-
ing under the seatbelt in the event of
a collision, always put the seatback
in the upright position while the
vehicle is in motion. Also, do not
place objects such as cushions
between the passenger and the
seatback. If you do so, the risk of
sliding under the lap belt and of the
lap belt sliding up over the abdomen
will increase, and both can result in
serious internal injury or death.
To adjust the angle of the seatback, move
the control switch forward or backward.
& Lumbar support (Driver’s
seat)
Pull the lever forward or backward.
Pulling the lever forward will increase the
amount of support for your lower back.
Seat, seatbelt and SRS airbags 1-5
– CONTINUED –
1
To Next Page
Loading...
