北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
3. Remove the grip portion of the screw-
driver.
4. While depressing the brake pedal,
insert a screwdriver into the hole, move
it right and left while pushing the shift
lock release button using a screwdri-
ver, and then move the select lever.
If the select lever does not move after
performing the above procedure, the shift
lock system may be malfunctioning. Con-
tact a SUBARU dealer for an inspection as
soon as possible.
& Driving tips
S07BG05
CAUTION
If the accelerator and brake pedals
are depressed at the same time,
driving torque may be restrained.
This is not a malfunction.
. Always apply the foot or parking brake
when the vehicle is stopped in the “D” or
“R” position.
. Always apply the parking brake when
parking your vehicle. Do not hold the
vehicle with only the mechanical friction
of the transmission.
. Do not keep the vehicle in a stationary
position on an uphill grade using the “D”
position. Use the brake instead.
. The engine may, on rare occasions,
knock when the vehicle rapidly accel-
erates or rapidly pulls away from a
standstill. This does not indicate a
malfunction.
7-8. Power steering
S07AJ
& Power steering warning light
S07AJ10
& Power steering system fea-
tures
S07AJ11
The vehicle is equipped with an electric
power steering system. When the ignition
switch is turned to the “ON” position, the
power steering warning light on the com-
bination meter illuminates to inform the
driver that the warning system is function-
ing properly. Then, if the engine started,
the warning light turns off to inform the
driver that the steering power assist is
operational.
Power steering
362
To Next Page
Loading...
