Subaru Crosstrek - Engine Start and Stop; Push-Button Ignition System; Ignition Switch Operation

4
◆
Some functions are available on certain models.
◆
For detailed operating and safety information, please refer to your Owner’s Manual.
Start/Stop engine
To start engine:
STEP1:
Carry the access key, and sit in the driver’s
seat.
STEP2:
Apply the parking brake.
STEP3:
Shift the select lever into the
P
position.
STEP4:
Depress the brake pedal until the indicator on
the push-button ignition switch turns green.
STEP5:
While depressing the brake pedal, press the
push-button ignition switch.
To stop engine:
STEP1:
Stop the vehicle completely.
STEP2:
Move the select lever to the
P
position.
STEP3:
Press the push-button ignition switch.
Every time the button is pressed without depressing the brake pedal, the power is switched
in the sequence of
OFF
➞
ACC
➞
ON
➞
OFF
.
OFF
(Turned off )
ACC
(Orange)
ON
(Orange)
Change of the power supply (Without starting engine)
The key can be turned from
ACC
to
LOCK
only when
the key is pushed in while turning it (all models) and
the select lever is in the
P
position (CVT models).
Push-button ignition switch (if equipped)
Ignition switch (if equipped)
Operation
indicator