To Next PageTo Next Page
Need help?Do you have a question about the Subaru JULY BRZ 2013 and is the answer not in the manual?
General| Brand | Subaru |
|---|---|
| Model | JULY BRZ 2013 |
| Category | Automobile |
| Language | English |
Explains manual's organization, component details, and definitions of terms.
Covers maintenance instructions, work steps, tools, torque, and diagnosis processes.
Explains SI units, metric/yard equivalents, and provides terminology definitions.
Details specifications for BRZ model: dimensions, engine, electrical, transmission, steering, etc.
Specifies gear ratios and reduction gears for MT and AT transmissions.
Lists specifications for suspension, brake, tire, and fluid capacities.
Provides curb weight and gross vehicle weight data for different configurations.
Covers general safety, environmental protection, and specific warnings for vehicle systems.
Procedures and cautions for hose removal and installation.
Precautions when using silicone spray near electrical components.
Essential points for service operations, vehicle protection, and tool preparation.
Procedures for removed parts, battery, and pre-delivery inspections.
Tips on car wash, fasteners, static electricity, and work security.
Safe procedures for lifting, securing, and towing vehicles.
Explains VIN usage and positions of various vehicle labels.
Decodes VIN and explains model number label components.
Details engine type, transmission serial number, and identification locations.
Lists option codes for various vehicle features.
Use specified materials for best performance.
Recommendations for gasoline, oils, and greases.
Specifies recommended fluids, coolant, refrigerant, and greases.
Lists recommended adhesives and sealants for vehicle assembly.
Outlines the goals of the pre-delivery inspection.
Static checks performed upon vehicle receipt.
Checks performed with the engine running.
Checks performed after dynamic testing.
Importance of periodic maintenance for performance and problem detection.
Provides maintenance schedules based on mileage and time.
Procedures for inspecting and replacing engine oil.
Instructions for replacing the engine oil filter.
Steps for removing and replacing spark plugs.
Inspection and replacement of the V-belt.
Inspection of emission-related hoses for damage.
Inspection procedures for the PCV valve.
Inspection of the fuel line for rust, damage, and leaks.
Procedures for replacing the fuel filter.
Inspection and replacement of the air cleaner element.
Inspection of the radiator and cooling system.
Inspection and replacement of engine coolant.
Inspection and adjustment of the clutch system.
Inspection and replacement of transmission gear oil.
Inspection, replacement, and adjustment of ATF.
Inspection and replacement of differential gear oil.
Inspection of brake lines and service brake.
Inspection and replacement of brake fluid.
Inspection of disc brake pads and rotors.
Inspection and adjustment of the parking brake.
Inspection of suspension components like ball joints and bushings.
Inspection of front and rear wheel bearings.
Inspection of axle boots and propeller shaft.
Inspection and rotation of tires.
Inspection of steering wheel, gearbox, and tie-rods.
Replacement of the A/C filter.
