16 17
Getting
Started
Instrument
Panel
Gauges
Personalize Controls While
Operating
Safety / In Case
of Emergency
Additional
Information
Controls
Controls
1
AM/FM Stereo with Single
Disc CD/MP3/WMA Player
(if equipped)
Radio Functions
1. Power / Volume Control
Press the power / volume control knob
for on or off; rotate the knob to control
the volume.
2. Bass, Treble, Balance and Fader
Each press of the “TUNE/TRACK/CH”
button will cycle you through Bass,
Midrange, Treble, Fade or Balance. Rotate
the “TUNE/TRACK/CH” knob to adjust
the desired level.
3. FM / AM
Press the “FM” button to choose FM1,
FM2 or FM3 reception. Press the “AM”
button to choose AM reception.
4. Tune / Track
Rotate the “TUNE/TRACK/CH”
knob clockwise to increase the
tuning frequency; rotate the knob
counter-clockwise to decrease it.
5. Seek
Press the right or left arrow of the “SEEK”
button to pick up the next highest or
lowest frequency.
6. Presets
You can save up to six favorite stations
for each band – FM1, FM2, FM3 and AM.
Select a frequency and press one of the
preset buttons for more than 1.5 seconds
to store it.
7. Satellite Radio
An optional satellite radio tuner and
antenna can be connected to this audio
unit. You can hear satellite radio programs
by pressing the “SAT” button after
connecting optional equipment. To receive
satellite radio service, it is necessary to
enter into a separate contract with a
satellite radio provider.
CD Player functions
8. Load
Insert a disc into the slot. The CD
will automatically be drawn in and
will begin play at the rst track.
9. Play CD
Press the “CD/AUX” button and
playback will begin.
10. Repeat / Random
Pressing the “RPT/RDM” button
once to repeat the current track,
two presses to repeat the current
folder and a third press to turn
off repeat.
Press and hold the “RPT/RDM”
button once to hear all the tracks
on the disc in random order. Two
presses to randomize folders on a
CD, a third press to randomize the
entire disc and a fourth press to
turn off random.
11. Eject
Press the button to eject the disc.
12. Forward / Reverse
Rotate the “TUNE/TRACK/CH”
knob clockwise to skip to the
beginning of the next track; rotate
the knob counter-clockwise to
skip to the beginning of the
current track. Rotate the knob
counter-clockwise again to go to
the previous selection.
13. Fast Forward / Fast Reverse
Press the right arrow of the “SEEK”
button for more than one second
to fast forward. Release the button
to stop. To fast reverse, press the
left arrow for more than one second
and release the button to stop.
14. Scan
Press the “SCAN” button to begin
previewing the rst 10 seconds
of each track on the disc. Normal
playback will resume after all
tracks have been scanned. Press
the “SCAN” button again to stop
scanning and listen to the track
being previewed.
MP3/WMA Formatted CD
Player Functions
15. Folder Selection
Press the up arrow of the
“FOLDER” button to select the next
folder. Press the down arrow to go
back to the rst music le. Quickly
press the down arrow again to go
back to the previous folder.
16. Page Scroll
Press the “TEXT” button to select
title display. Press and hold again to
scroll through the title, 8 characters
at a time. Up to a maximum of 64
characters.
17. Display
Press and hold the “TEXT” button
during playback to change the
display to show the play time, disc
title, artist name and track title. If
the disc is formatted with MP3/
WMAs, press the “TEXT” button to
change the display to show play
time, folder name and le name.
11
9 3
8
15
13
5
13
3 7
16
17
14
10
4
2
6 6
12
769269_11_Subaru_Legacy_QRG_051310b.indd 16-17 6/15/10 2:19 PM
To Next Page
Loading...
