IG(H4DOTC)-7
IGNITION
Ignition Coil & Ignitor ASSY
3. Ignition Coil & Ignitor ASSY
A: REMOVAL
Direct ignition type has been adopted. Refer to
“Spark Plug” for removal procedure. <Ref. to
IG(H4DOTC)-4, REMOVAL, Spark Plug.>
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
16 N
⋅
m (1.6 kgf-m, 11.7 ft-lb)
C: INSPECTION
For inspection procedure, refer to “Diagnostics for
Engine Starting Failure”. <Ref. to EN(H4DOTC)(di-
ag)-48, IGNITION CONTROL SYSTEM, Diagnos-
tics for Engine Starting Failure.>
To Next Page
Loading...
