What to do if the sound suddenly stops working in my Subaru Legacy 2021?
If the sound suddenly stops working in your Subaru Automobile, it may be due to an error in the system. In this case, reset the system.
Why SUBARU STARLINK does not start in my Subaru Automobile?
If SUBARU STARLINK does not start in your Subaru Automobile, it could be due to the time not matching. Connect your smartphone. Alternatively, set the phonebook download function to on.
What to do if 'Connection failed. Unable to check for updates because no active internet connection has been detected' is displayed on my Subaru Legacy 2021 Automobile?
If you see the message “Connection failed. Unable to check for updates because no active internet connection has been detected.” in your Subaru Automobile, it means that the connection between the system and the Wi-Fi access point is weak or has been lost. To resolve this, connect the system to the Wi-Fi access point again and perform the update in an area with low electrical noise.
Why can't I view messages on my Subaru Automobile?
If messages cannot be viewed on your Subaru Automobile, it is likely that message transfer is not enabled on your cellular phone. To fix this, enable message transfer on your cellular phone (approve message transfer on the phone).
How to fix weak Wi-Fi connection in my Subaru Legacy 2021?
If the connection between the system and the Wi-Fi access point is weak or has been lost in your Subaru Automobile, connect the system to the Wi-Fi access point again and perform the update in an area with low electrical noise.
What does 'Installation Failed (1)' mean on my Subaru Automobile?
If you see “Installation Failed (1)” on your Subaru Automobile, it means the reading of the data on the USB memory device failed. Disconnect and then reconnect the USB memory device, check that it is connected correctly, and attempt to perform the update again.
What does 'Installation Failed (2)' mean on my Subaru Automobile?
If you see “Installation Failed (2)” on your Subaru Automobile, it indicates that corruption of the data on the USB memory device was detected. To resolve this, download the map update data again, copy it to a different USB memory device, and attempt to perform the update again.
What does 'Installation Failed (5)' mean on my Subaru Automobile?
If your Subaru Automobile displays “Installation Failed (5)”, it means that an error in the system data was detected while performing the update. Download the map update data again, copy it to a different USB memory device, and attempt to perform the update again.
Why can't I register my cellular phone to my Subaru Automobile?
There could be several reasons why you can't register your cellular phone to your Subaru Automobile system: * You might have entered an incorrect passcode. If so, enter the correct passcode on the cellular phone. * The registration operation might not have been completed on the phone. If so, complete the registration operation on the cellular phone (approve registration on the phone). * Old registration information might be present. If so, delete the existing registration information from both the system and the cellular phone, then register the cellular phone you wish to connect. * Another Bluetooth phone might already be connected. If so, manually connect the cellular phone you wish to use to the system. * The Bluetooth function may not be enabled on the cellular phone. If so,...
Alerts users to potential hazards that could result in injury to them or others.
Provides meanings of abbreviations used in the manual.
Explains symbols found on the vehicle.
Details safety measures and precautions to follow while driving.
Covers various general topics including advisories and system information.
General| Brand | Subaru |
|---|---|
| Model | Legacy 2021 |
| Category | Automobile |
| Language | English |
To Next Page
