6-14 Interior equipment
2. To keep the lid open, hang the hook
(provided on the back of the lid) on the
rear edge of the roof.
3. Remove the left and right parts of the
cargo floor lid.
4. Stow the cover housing and rear gate
board in the cargo area end.
To install the cover housing
To install the cover housing, insert both
ends of the cover housing into the retain-
ers.
To install the rear gate board
Insert the hooks on the rear gate board
into the holes in the rear gate panel.
Fit the top of the rear gate board into the
groove in the rear gate panel.
600110
400235
400336
400242
400243
To Next Page