14
Controls
While the light switch is on, rotate the dial downward to dim the instrument panel illumination.
Rotate the dial upward to make the illumination brighter. When the dial is fully rotated upward,
the instrument panel illumination becomes full bright.
Light Controls
Push up for
right turn signal.
Push down for
left turn signal.
Push forward to change from low
beam to high beam. Pull the lever
back to center to return to low beam.
Turns on instrument panel
lights, tail lights, parking lights
and license plate lights.
Turns on headlights, instrument
panel illumination, parking lights,
tail lights and license plate lights.
Turns on
fog lights
(if equipped).
AUTO (if equipped): The vehicle’s lights
are automatically on or off, depending
on the level of outside light.
2926966_18a_Subaru_Outback_QRG_050417.indd 14 5/4/17 3:36 PM
To Next Page
Loading...
