What to do if my Subaru RGX4800 has no DC current?
If your Subaru Portable Generator has no DC current, the following components may need to be replaced: the DC coil of the stator, the diode rectifier, or the DC circuit breaker. Also, inspect the wiring for breaks or damage and ensure it is properly connected; replace the wiring if necessary.
General| Brand | Subaru |
|---|---|
| Model | RGX4800 |
| Category | Portable Generator |
| Language | English |
Explains DANGER, WARNING, and CAUTION alert levels.
Covers fuel, flammables, ventilation, placement, and leveling safety.
Addresses grounding, AC connection, wet conditions, hot engine, and battery safety.
Covers extension cords, maintenance, and warning labels.
Instructions for checking and refilling engine oil level.
Procedure for checking and refilling the fuel tank.
Inspecting parts for damage and clearing surroundings for safety.
Steps for grounding the generator to the earth or appliance.
Step-by-step guide for starting the generator engine.
Using AC power, GFCI, and Full Power Switch features.
Operation of idle control and DC battery charging.
Procedures for safely shutting down the generator.
Items to check before each generator use.
Recommended intervals for maintenance tasks.
Step-by-step guide for changing engine oil.
Instructions for cleaning and maintaining the air cleaner.
Procedures for cleaning spark plugs and fuel strainers.
Recommendations for operating the engine at high altitudes.
Diagnosing and resolving engine starting problems.
Identifying causes when no electricity is produced.
To Next Page
