CHANGING “Bluetooth Power (Bluetooth Power)”
1. Select
(Bluetooth Power).
n WHEN “Bluetooth Power (Bluetooth Power)” IS ON
The Bluetooth device is automatically connected when
the ignition switch is turned to the “ACC” or “ON” position.
n WHEN “Bluetooth Power (Bluetooth Power)” IS OFF
The Bluetooth device is disconnected, and the system will
not connect to it next time.
l While driving, the auto connection state can be changed from off
to on, but cannot be changed from on to off.
EDITING THE Bluetooth NAME
1. Select
(Bluetooth Name).
2. Enter a name and then select
(OK).
EDITING THE PIN-CODE
1. Select
(Bluetooth PIN).
2. Enter a PIN-code and then select
(OK).
docstructure.indb 189 2015/08/11 14:43:51
To Next Page
Loading...
