EasyManua.ls Logo

Subcold ECO 75 - Page 4

Subcold ECO 75
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
1. The circuitry for the refrigerator must be isolated. The area of cross section of wire must be larger than
0.75mm2. The power plug should have its own socket, the socket must be grounded as adapter may cause
the socket to overheat.
2. The voltage and frequency of this product should be 220-240V;50Hz. Contact with the local maintenance
station or retailer in case of electrical cord damage.
3. Always disconnect the power only by pulling the power plug out of the socket directly but not by the cord.
4. Do not damage the refrigerant circuit.
5. Persons with low physical, sensory and mental capabilities (including children of below 8 years) are not
advised to use this appliance unless they are well supervised/instructed by a safety person. Children should
be supervised to ensure that they do not play with the appliance. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
6. Keep enough space around the unit for ventilation, the appliance enclosure or the built in
structure should be clear of obstruction and have a minimum of 5-10cm gap on the rear, sides and 30cm
above.
7. Before you throw away your old refrigerator or freezer.
Take off the doors;
Leave the shelves in place so that children may not easily climb inside
8. Do not store in the appliance explosive devices / substances such as aerosol cans with a flammable
propellant . This appliance is intended to be used in household and similar applications such as :
Staff kitchen areas in shops, offices and other working environments;
Farm houses and by clients in hotels, motels and other residential type environments; bed and
breakfast type environments;
Catering and similar non-retail applications.
9. Do not use electrical appliance inside the food storage compartments of the appliance, unless they are of the
type recommended by the manufacture.
10. All affected or faulty parts must be changed be a certified technician
11. To avoid hazards, the supply cord must always be replaced by the manufacturer, its service agent or similarly
a certified/qualified persons when damaged.
For ensure your personal safety, please follow the points below:
Warning:
This appliance must be fixed in accordance to the instructions provided to avoid hazard
When positioning the appliance, ensure the supply cord is not trapped or damaged.
Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance.

Related product manuals