5
1. The refrigerator should be located in a completely
flat surface , Leave 5~10 cm between each side of
the appliance and the wall, and leave 30 cm
between the top of the appliance.
2. Choose a location which is not exposed to
sunlight , high temperature or humidity
3. Remove all adhesive transport tapes before using.
4. The appliance can be adjusted by turning its two
legs in front the bottom when it is unstable.
Turning clockwise can raise up the machine.
5. The location should be firm and flat. If it is not in
a level position it may cause noise / vibration:
1) The noise may be increased if the floor is not
firm and level
2) Put a sheet under the appliance for better
heat emission if you need to locate it onto a
carpet.
6. Make sure the adjustable legs are tight to the
floor, and set the appliance slope backwards
slightly for keeping the doors closed tightly.
1. Allow some space between items inside for air circulation.
2. Food should be kept in sealed package to prevent them from getting dry
3. Hot food should be cooled down before placing into the appliance.
4. Reduce the frequency of door opening - it can efficiently lower the electricity consumption.
For disposal of the appliance:
To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. And the disposal
should only be done through public collection
points.
For installation, servicing:
Appliance should be placed on a horizontal floor
and allow free ventilation.
For handling:
Always handle the appliance gently and with care
to avoid any damage.
To Next Page
Loading...
