Need help?Do you have a question about the SubGear XP Air and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Battery Type | CR2450 |
| Nitrox | Yes |
| Modes | Air, Nitrox |
| Battery Life | Approx. 300 dives |
| Water Resistance | 100 meters |
Essential safety and usage recommendations for the dive computer.
Explains the meaning of key signal words and symbols used throughout the manual.
Offers a concise overview of the dive computer's display elements and functions.
Details the operating scheme and button functions for navigating the dive computer.
Describes the components and features of the XP AIR dive computer.
Details the general operation and user interface of the dive computer.
Explains how to use Dive.Log software for data transfer and settings configuration.
Guides on switching the display on/off and checking battery capacity.
Guides on selecting and activating various user functions and modes.
Details the SOS mode, its activation, and implications for diver safety.
Describes how to activate and use the display backlight for improved visibility.
Provides instructions on how to properly mount the pressure transmitter onto the regulator.
Explains the procedure for pairing the transmitter with the XP AIR dive computer.
Defines key terms and symbols used on the XP AIR dive computer display.
Explains display elements for no-stop and decompression diving phases.
Explains Nitrox settings, O2 partial pressure, and oxygen toxicity calculations.
Details visual and audible attention messages indicating specific dive situations.
Explains the critical alarms and the situations that trigger them for diver safety.
Guides on setting the O2 mixture and Maximum Operating Depth (MOD).
Instructions for setting the microbubble level for enhanced safety.
Covers final checks and preparation steps before commencing a dive.
Describes monitoring upon immersion and the calculation of dive time.
Details display of current depth and recording of maximum depth.
Explains temperature display and ascent rate monitoring, warnings, and impact.
Details ppO2 max, MOD, oxygen toxicity calculation, and associated warnings.
Explains tank pressure monitoring, RBT calculation, and related warnings.
Details no-stop time, decompression stops, and ascent obligations.
Explains decompression stop details and the calculation of total ascent time.
Explains dive closure, logbook entry, and desaturation time calculation.
Explains no-fly time calculation and microbubble warnings for safety.
Explains altitude ranges, adaptations, and critical altitude restrictions.
Addresses decompression strategies for dives conducted at higher altitudes.
Compares the effects of different microbubble levels on dive planning and safety.
Defines MB terms and explains displays for no-stop and level stop phases.
Instructions for setting the desired microbubble level (L0-L5).
Provides information on MB no-stop time and level stop requirements.
Details total ascent time and decompression obligations when using MB levels.
Explains the relationship between level stops and decompression stops.
Guides on planning a no-stop dive using the dive planner feature.
Details how to plan a decompression dive using the dive planner.
Explains how to exit the dive planner feature after use.
Explains the information recorded in the logbook for each dive.
Guides on how to navigate and operate the logbook feature.
Provides technical specifications, operating limits, and battery information.
Offers recommendations for maintaining the dive computer and its components.
Detailed instructions for replacing the battery in the transmitter.
Explains how tank pressure readings are converted based on temperature.
Outlines the warranty terms, conditions, and claim process for the dive computer.
States FCC compliance information regarding device operation and interference.
Provides an index for quick reference to topics and page numbers within the manual.
To Next Page
