SubGear XP-3G - User Manual

English
Deutsch
Français
Italiano
Español
Nederlands
日本語
简体中文
XP-3G

Summary

Safety Considerations

Guidelines for Subgear XP-3 G Use

2. System and Operation

2.2 Operation Overview

Guide to using the dive computer's buttons, water contacts, and basic functions.

2.2.1 Push Buttons

2.2.2 Water Contacts

2.2.3 Dive.Log Software

Dive Settings

2.2.4 Display Activation

2.2.5 Surface Navigation

2.2.9 Battery Condition Check

2.2.10-2.2.12 Backlight, Display Off, Alarm Clock

2.3 SOS Mode

3. Diving with Subgear XP-3 G

3.1.3 Nitrox Information

3.2 Attention Messages and Alarms

3.3 Dive Preparation

3.3.1 Gas Mixture and ppO2 Max Setting

Procedure for setting the oxygen fraction and maximum partial pressure for gas mixtures.

3.3.2 Microbubble (MB) Level Setting

3.4 Dive Functions

3.4.3 Dive Time

3.4.4 Current Depth and O2% Mix

3.4.5 Max Depth and Temperature

3.4.6 Ascent Rate

3.4.7 ppO2 Max and MOD

3.4.8 Oxygen Toxicity (CNSO2%)

3.4.9 Nitrogen Loading Bar Graph

3.4.10 Decompression Information

3.4.11 Safety Stop Timer

3.5 Surface Functions

3.5.2 Residual Nitrogen Bar Graph

3.5.3 Desaturation, No-Fly, No-Dive Warnings

3.6 Diving in Mountain Lakes

3.6.3 Prohibited Altitude

3.6.4 Decompression Dives in Mountain Lakes

4. Gauge Mode

5. Apnea Mode

5.2 Diving in Apnea Mode

6. Diving with Microbubble (MB) Levels

6.1 MB Level Comparison (L0 vs. L5)

6.2 Terminology

6.3 MB Level Preparation

6.3.1 Setting the MB Level

Procedure for selecting and setting the desired microbubble level.

6.4 MB Level Dive Functions

6.4.1 Level Stop Information

6.4.2 Total Ascent Time

6.4.3 Decompression Obligation

6.4.4 Level Stop and Deco Stop

6.5 Completing a Dive with MB Levels

7. PDIS (Profile Dependent Intermediate Stop)

7.1 Introduction to PDIS

7.2 How PDIS Works

7.3 Multi-Gas PDIS Considerations

7.4 Diving with PDIS

8. Diving with 2 or 3 Gas Mixtures

Setting Gas Mixtures and Switch Depths

Procedure for setting gas mixes and their corresponding switch depths.

8.1 Functions During Multi-Gas Dives

Predictive Decompression Prognosis

Changing Gas Mixtures During Dive

9. CCR Diving

CCR Dive Preparation

Steps to prepare the dive computer for Closed Circuit Rebreather diving.

Setting ppO2 and Gas Mixture

Configuration of partial pressure of oxygen and gas mixtures for CCR dives.

Setting Setpoints SP1 and SP2

Setting the Bail-Out Gas

CCR Dive Functions

Switching SP1;SP2 to Bail-Out

10. Dive Planner

10.1 Planning a No-Stop Dive

Steps for planning a dive that does not require decompression stops.

10.2 Planning a Decompression Dive

Procedure for planning dives that include mandatory decompression stops.

11. LOGBOOK

11.2 Logbook Operation

Statistic Information

12. SETTINGS

12.2 Menu Set 1

Configuration options for scuba diving settings, alarms, and general preferences.

Enabling CCR Diving

Setting Depth Alarm

Setting Dive Time Alarm

Setting Safety Stop Duration

Setting Max ppO2

Enabling Two-Gas Diving

Enabling PDIS

Resetting Remaining Saturation

11.3 Menu Set 2

Setting Alarm Clock Time

Switching Sound On;Off

11.4 Menu Set 3 (Apnea)

Setting Dual Depth Alarm

Setting Incremental Depth Alarm

Setting Ascent Speed Alarm

12. APPENDIX

12.2 Maintenance

Recommendations for proper care and upkeep of the Subgear XP-3G dive computer.

12.2.1 Battery Replacement

12.3 Warranty

SubGear XP-3G Specifications

General

Brand	SubGear
Model	XP-3G
Category	Diving Instrument
Language	English