EasyManua.ls Logo

SubGear XP-3G - 8.1 Functions During Multi-Gas Dives; Predictive Decompression Prognosis

SubGear XP-3G
105 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59
English
Diving with 2 or 3 gas mixtures
8. DIVING WITH 2 OR 3 GAS MIXTURES
Bottom mix, gas 1
Time
Switching
depth
(MOD
gas d)
Switching
depth
(MOD
gas 2)
Travel mix, gas 2
Depth
Deco mix (gas d)
NOTE:
The following chapter deals with the characteristics of diving with 2 or 3 gases. In case
of using 2 gas mixtures (gas 1 and d), just ignore the parts describing the gas 2.
Subgear XP-3G enables you to use up to 3 different Nitrox mixtures during the same dive.
Tank 1 contains the bottom mix (gas 1), tank 2 the travel mix and tank d contains the deco
mix (gas d).
Switching the deco gas option on and off
In order to enable two- or three gas diving you must turn on the deco gas option in the SET
1 menu ->87.
Setting the gas mixture and the depth for changing the gas mixture
21 d
O
2
fraction
Range of O
2
fraction
100%
21%
During dives with 2 or 3 gas mixtures the bottom mix (gas 1) contains the lowest and gas d
the highest fraction of oxygen.
Subgear XP-3G will only accept settings corresponding with this order.
WARNING
Forgasmixtureshavinganoxygenpercentageof80%orgreatertheppO
2
is xed at 1.6 bar and
cannot be altered in any way.

Table of Contents

Related product manuals