SubGear XP-3G - 2.2.9 Battery Condition Check

17
System and operation
English
2.2.7 Checking the surface interval
Surface interval
From the time of day display you can check
the surface interval by pushing
(logbook menu).
The surface interval is the time since the end
of the last dive and is displayed as long as
there is remaining saturation.
2.2.8 Displaying the date
NO
NO
S
L
O
W
Date
From the time of day display you can display the date by pushing 1x or 2x (depending
on whether there is desaturation time left).
The display switches back to the time of day display after 5 seconds without operation.
2.2.9 Checking the battery condition
NO
Battery condition / performance
From the time of day display you can check the battery condition by pushing 2x or 3 x
(depending on whether there is desaturation time left).
Subgear XP-3G displays the estimated remaining battery performance for 5 seconds as a
bar graph. If the bar graph shows 3 segments the battery warning appears ->24 and the
battery has to be replaced ->99.
WARNING
•Ifthebargraphshows2segments,thebatterysymbolwillblink,onthesurfaceandindivemode,
to alert the diver of a dangerous situation: the battery may not have enough energy to nish a dive.
•Replacethebatterywhenthesteadybatterysymbolappears(3segments)!