SubGear XP-3G - 3. Diving with Subgear XP-3 G

21
Diving with Subgear XP-3G
English
3. DIVING WITH SUBGEAR XP-3G
3.1 Terminology / Symbols
The information on the display of Subgear XP-3G varies depending on the kind of dive and
the dive phase.
NOTE: For information about diving with microbubble (MB) levels see ->46. Specic
features of “Diving with two/three gas mixtures”, are described in chapter 8 ->59.
Specic features of “Diving with CCR”, are described in chapter 9. CCR Diving
66.
3.1.1 General terminology / Display during no-stop phase
 (Maxdepth >)Temperature
 >Temperature ,O
2
mix andtimeofday  >(Maxdepth)…
37min dive time
Elapsed bottom time
No-stop time
24min
Current depth
26.2m
Decompression phase
Dive phase during which
surfacing is allowed only
after decompression
stops are completed.
No-stop phase
Dive phase during which surfacing is allowed
without stop.
Time
Depth
Ascent rate
(Only while ascending)
CCR: SP ppO
2 x100
(until CNS O
2% >50%)
70 = 0.70 bar
130 = 1.30 bar
%
Current depth
In metres (feet)
Max depth
Max depth
reached during
the dive
No-stop time
Remaining time
at a given depth
during which ascent
is allowed without
decompression
stop (min).
Nitrogen loading
bar
Oxygen toxicity
CNS O
2%
(Only if CNS O
2% >50%)
Dive time
Duration of
the dive (min)
DEPTH
NO STOP
DIVE TIME
Max depth
O2 Mix
(until CNS O
2% >50%)
CNS O
2
%