75
English
CCR Diving
Switching SP1 or SP2 to Bail-Out
A diver can switch to the Bail-Out at any time.
1. Initiate the switching process by pressing . Subgear XP-3G displays “SP1” or “SP2” for 30
seconds.
Scroll with until Subgear XP-3G displays “bail”.
2. Switch to the regulator with the Bail-Out and start breathing.
3. Confirm the change by pressing . “Bail”) and its oxygen fraction is displayed for 5 seconds
without blinking. The decompression calculation will readjust accordingly.
To Next Page
Loading...
