Do you have a question about the Suburban SH-42 and is the answer not in the manual?
BTU/h | 42, 000 |
---|---|
Ignition | Direct Spark Ignition |
Input BTU | 42, 000 |
Voltage | 12V DC |
Fuel Type | Propane |
Regularly inspect furnace venting for obstructions and soot. Observe burner flame for proper blue color, indicating correct combustion.
Keep the furnace area clear of combustibles and ensure unobstructed airflow for combustion and circulation.
Never operate with gas smell, blocked vents, or restricted airflow. Address erratic cycling or ignition delays immediately.
Never attempt self-repair; use only factory authorized parts. Contact qualified agencies for all servicing and repairs.
Yearly inspection of furnace installation, venting, chambers, gaskets, and piping by a qualified service agency.
Read manual, check for gas leaks, ensure proper valve operation, and follow ignition sequence carefully.
Set thermostat, allow purge cycle, then move to desired setting. Wait for ignition. Repeat startup if necessary.
If burner fails to light after three attempts, shut down and contact a service agency. Do not force ignition.
Set thermostat to lowest setting, then to 'OFF'. Turn off manual valve or LP tank valve.
Covers defects in material and workmanship for two years from purchase. Owner must establish warranty period.
Extends warranty for heat exchanger defects for an additional three years; labor is not included.
Excludes normal maintenance, incorrect installation, misuse, unauthorized alterations, and external damage.
Steps for resolving product issues: check RV manufacturer warranty, contact Suburban Service Center, or call customer service.