Wine Storage Equipment 3
subzero.com
Wine Storage Equipment
T
he importance of the installation of the Sub-Zero wine
storage unit cannot be overemphasized. Installation
should be done by a qualified installer.
Before you begin the installation process, it is recom-
mended that you read this entire installation guide. There
are key details that you should take special care to
observe during the installation. By reading these instruc-
tions carefully, you will make the installation process
easier, problem-free and, most importantly, safe.
Any questions or problems regarding the installation
should be directed to your Sub-Zero dealer or Sub-Zero
customer service at 800-222-7820. You may also check
the contact & support sectionofour website, subzero.com.
Important product information, including the model and
serial number of your unit are listed on the product rating
plate. For models 424 and 424FS, the rating plate is
located on the underside of the top wall. For models 427,
427R and WS-30, it is attached to the underside of the
control panel. Refer to the illustrations.
IMPORTANT NOTE: Throughout this guide, dimensions in
parentheses are millimeters unless otherwise specified.
Models 424 and 424FS.
R
ATING PLATE
Models 427, 427R and WS-30.
RATING PLATE
To Next Page
Loading...
Need help?
General
