6
11. RCA LINE INPUT
Connect an external device to this input
using standard RCA cables. This can be used
to connect to a CD player computer, tablet,
smartphone, etc.
12. CHANNEL LINE INPUT (UNBALANCED)
Connect a guitar, synthesizer, drum machine,
CD player, or other line-level device here using
a standard 1/ 4” TS cable.
13. SUB OUT
When a Jack cable is connected, all frequencies
below 120KHz are sent to this Jack at line level
(SZPA-612 & SZPA-815 only).
14. LINE OUTPUT
Connect a line-level device to this unbalanced
1/4” mono output using a standard 1/ 4” TS
cable. The Line Output is a mono sum of the
stereo outputs and therefore the signal will
mirror the Speaker Output.
15. AUX IN
Connect an external device to this input using
a standard RCA cable. The signal wiII be sent
directly to the Speaker Output.
16. RECORD OUT
Connect an external recording device here
using a standard RCA cable.
17. AUX IN LEVEL
Adjust this knob to control the signal level of
the Aux In.
18. MASTER LEVEL CONTROL
Adjust the knob to control the signal level that
is sent to the Speaker Output.
To Next Page
Loading...
Need help?
General